Catalogue 8 - STAUFF Diagtronics

www.stauff.com/8/en/#71 C 71 Interface Module with USB or Ethernet Interface § INTERFACE - LPM-II-USB/ETH USB ETH incl. connection cable LPM II-CAB-P-FL-3 CAN, Modbus or 4-20 mA (time multiplex) LPM II-USB INTERFACE LPM II-ETH INTERFACE Network USB ETH ETH USB Port for Data transfer via USB Stick hydr. line 0 ... 10V 4 ... 20 mA Diagtronics LPM-II-plus Product Description The LPM-II-plus is connected to an EDP system or a laptop/PC using an interface module with a USB or an Ethernet interface. Either interface module is connected to the LPM-II-plus using a connecting cable (3 m / 9.84 ft). With the power supply unit connected, the LPM-II-plus is supplied with current via the connecting cable. The interface modules allow you to evaluate the measured data and to carry out programming using the supplied software. In USB operation, the LPM-II-plus can be supplied with current via the USB cable too. The USB interface is optionally also available with additional 0-10 V or 4-20 mA outputs. The 0-10 V interface provides six ISO channels, the relative humidity and the temperature on eight voltage outputs. The 4-20 mA version, on the other hand, supplies e.g. the NAS code and the relative humidity on two outputs. The optional USB interface enables the direct transfer of measurement data to a USB data medium. Order Code INTERFACE-LPM-II-USB a Series and Type Interface module with USB interface INTERFACE-LPM-II-USB Interface module with USB interface INTERFACE-LPM-II-USB-010V Interface module with USB interface INTERFACE-LPM-II-USB-420A Order Code INTERFACE-LPM-II-ETH a Series and Type Interface module with Ethernet interface INTERFACE-LPM-II-ETH LPM-II-CAB-P-P-3 LPM-II-plus-O (without display) USB / ETH / CAN / Modbus hydr. line LPM-II-plus-REMOTE DISPLAY LPM-II-plus Diagtronics Diagtronics LPM-II-plus REMOTEDISPLAY Remote Display Unit § DISPLAY-LPM-II-plus-REMOTE Connection diagram: PC connection of the LPM-II-plus Particle Monitor Product Description In the case of applications outside the operator’s field of view or in locations that are difficult to access, it is possible to display via a remote display the values that the LPM-II-plus measured. Order Code a Series and Type DISPLAY-LPM-II-plus-REMOTE DISPLAY-LPM-II-plus-REMOTE Connection diagram: Remote display Scope of supply: Power supply unit Interface module with USB interface Connecting cable (3 m / 9.84 ft) USB cable Scope of supply: Power supply unit Interface module with Ethernet interface Connecting cable (3 m / 9.84 ft) Note: An Ethernet cable is not supplied. Scope of supply: Remote Display LPM-II-CAB-P-P-3 connecting cable Hydraulic line Incl. LPM-II-CAB-P-FL-3 connecting cable INTERFACE-LPM-II-USB INTERFACE-LPM-II-ETH Flow Flow Hydraulic line LPM-II-plus-O (without display) LPM-II- -P-P-3 DISPLAY-LPM-II-plus-REMOTE USB/ETH / CAN Bus/Modbus Catalogue 8 § Edition 05/2021 Oil Analysis Equipment USB inte face to ransfer measured dat to a data carrier , dbus or 4- (ti e multiplex)